How To Replace An Outlet With A Gfci. Correctly wired gfcis will also protect other outlets on the same circuit. Use a screwdriver or drill to remove the wall plate.
Installing a GFCI Outlet howtos DIY from www.diynetwork.com
Using your needle nosed pliers or wire cutter, make sure the wires are straight and able to be put into the new gfci outlet. There are a few things to keep in mind when tackling this small project. Switch the breaker in your electrical panel to turn off the power to the outlet.
That Being Said, Let’s Take A Look At How To Change A Fault In Your Existing Outlet.
Adding a ground fault circuit interrupter (gfci). How to replace an outlet with a gfci. You can replace almost any electrical outlet with a gfci outlet.correctly wired gfcis will.
Go To Your Circuit Breaker And Switch Off The Circuit For The Gfci Outlet That Is Having Problems.
Rewire the gfci outlet to the electrical system; The next step is to push the wires into the wall and secure the outlet in place with screws. Using your needle nosed pliers or wire cutter, make sure the wires are straight and able to be put into the new gfci outlet.
Then Unscrew Your Ground Fault Circuit Interrupter Outlet And Pull Out The Outlet From The Box.
Two main problems can cause a gfci not to perform correctly. Devices with motors can trip gfci outlets. Rewire the gfci outlet to the electrical system;
After You Have Removed The Old Outlet, You Can Begin Replacing It With The New Gfci Outlet.
Take out the black and white wires from your gfci outlet. These can either be caused by no power to the outlet or a fault in the gfci receptacles, which is why you need to test them at least once a month. Rewire the gfci outlet to the electrical system;
You Can Join The Green Wire To The Green Screw By Inserting The Bare Copper Ground Wire Into The Hole And Securing The Terminal With A Screwdriver.
Fit the gfci into the outlet box and secure it in place. Unscrew the two faceplate screws and put them somewhere safe. You can then put the old outlet off to the side and you’ll be left with five wires:
