How To Light A Pilot Light On A Coleman Furnace. Once the gas has had time to dissipate, turn the knob to pilot. then, hold down the reset button and bring the flame of a long lighter close to the pilot light opening. Tips to lighting the pilot on a coleman furnace in a manufactured home.
When you turn up the thermostat, the gas valve opens, allowing gas to enter the. A modern gas furnace usually has an electronic spark generator to ignite the gas when the thermostat calls for heat. Remove the access panel covering the gas control knob.
Press The Gas Control Knob Down All The Way And Hold It In The Depressed Position.
Make sure the thermostat is set to the heat mode. Turn the gas control knob to the off position. Allow gas to clear for five minutes.
How Do You Light A Pilot Light On A Coleman Furnace?
An older gas furnace has a standing pilot that stays on all the time — or at least, it's supposed to. If you have a spark igniter, press the ignition button until the pilot flame ignites. I have an 18 yr old coleman 7956 furnace, 5600 btu.
After A Few Seconds, The Pilot Will Light Up, Igniting The Furnace’s Burners.
The pilot light in a furnace is the small flame that burns all the time. A number of things can make an old furnace pilot light go out, including a strong draft, a faulty thermocouple or a loss of gas. 94 reference of pilot light goodman furnace.
Lighting A Pilot Light With A Match.
Press the reset button, which you will find in the middle of the limit switch. A friend replaced the ignitor so we were able to get the pilot light and furnace relight. How to light a pilot light on a coleman furnace.
Turn The Coleman Furnace System Switch To The Off Position On The Electric Service Panel.
To relight the pilot, follow the manufacturer's instructions exactly; The lines feed into a copper looking box, but i can not see if the back is open or if the pilot light is inside of this box. It has a manually lighted pilot light.