How To Fix A Panasonic Tv With No Picture But Sound

How To Fix A Panasonic Tv With No Picture But Sound. So before you panic, check if everything is properly working or no loose connections. I have tried the usual that i found online turning it off and pressing the power button and the 1st two times it came back on, unfortunately the 3rd time it hasn't and been without tv for almost a week.

Set the viewing mode to normal/dynamic. This solution could be use in any crt tvsupport me. Check that scart connections are pushed fully home and that the scart plug has not come out on one side.

Please Check Menu Settings Visible On Led Tv.

Unplug the tv for a few minutes, then plug it back in. No sound on thetv (picture is ok). I have tried the usual that i found online turning it off and pressing the power button and the 1st two times it came back on, unfortunately the 3rd time it hasn't and been without tv for almost a week.

Additionally, All The Other Devices Connected To The Panasonic Tv Should Be Disconnected And Allowed To Remain That Way For 10 Minutes.

Please check the brightness/contrast settings in menu. Check connections from dvd recorder to tv. Check that scart connections are pushed fully home and that the scart plug has not come out on one side.

Tv Audio Input Is Changed, Like To Aux;

Check connections from dvd recorder to tv. If there is a signal problem, then all that you need. This could be a firmware glitch with the tv and not hardware related.

Please Press The Menu Button On The Remote To Confirm.

Sometimes this clears any issue. This seems to be affecting the 2010 and 2011 models. Make sure the sound on your tv isn't muted.

The Good Thing Is That The Damaged Tv Screen Can Be Replaced By A Reputable Tv Repair Expert.

No picture on the tv (sound is ok). Videos you watch may be added to the tv's watch history and influence tv recommendations. The channel currently playing may not have audio;