How To Clean A Gas Fireplace Thermocouple. Some models will use hex nuts while others will simply install screws. Open the maintenance hatch below or to the side of your fireplace.
Top 20 of Cleaning A Thermocouple On Gas Fireplace irisryder from irisryder.blogspot.com
To disconnect the connector, use a wrench tool. Check to make sure that it’s in the direction of your pilot. Pull off the complete thermocouple setup after that.
First Things First, Clean Your Thermocouple.
Open the maintenance hatch below or to the side of your fireplace. Remove thermocouple from pilot assembly, using steel wool or emery cloth to lightly clean the tip removing any soot or build up that might have accorded due to an improper pilot flame. Next, remove the lava rocks and.
Turn Off The Gas To Your Heatilator Fireplace.
Thermocouples are also used on gas logs and in gas fireplaces or similar devices. Take out the faulty thermocouple and thermopile and replace them with new ones. Place a sheet or some newspaper on the floor in front of the fireplace.
The Thermocouple On A Gas Fireplace May Eventually Become Clogged With Dirt And Soot, Which Can Reduce The Effectiveness Of The Thermocouple And May Eventually Prevent The Fireplace From Lighting As Expected.
Then, remove the gas logs and use a soft paintbrush to get rid of any dirt or debris. Your thermocouples in a gas fireplace can be clogged with dirt or soot. How to clean a thermocouple on a gas fireplace step 1:
After Cleaning The Air Intake Holes, Light The Pilot Again And Check The Flame A Second Time.
Use the wrench to unscrew the connector that holds the thermocouple to the gas valve, then unhook the probe from its clip. Check to make sure that it’s in the direction of your pilot. Turn the gas off to your fireplace entirely and make sure to give the thermocouple about half an hour to cool off before trying to handle it.
You Can Clean Them By Poking A Piece Of Fine Wire Into The Holes Or Spraying Them With Compressed Air — Which You Should Obviously Do Only When The Gas Is Turned Off And Everything Else Is Unplugged Again.
You should never try to fix a gas fireplace when gas is still running to your unit. Remove the old thermocouple and secure the new one in its place. If you smell rotten eggs, it is time to take action and get out of your home.
